the first pic does not look like a pic of a mono amp..
All outgoing email has been globally disabled by an administrator. No email notifications of any kind will be sent.
1 pic 4 channel amp ki ha or 2nd pic or 3rd pic SM 1502x mono ki ha..
Well opening up amp needs a lot of extra time on hand I own a Alpine MRV F540 which is one of the most powerful amps made by alpine in a 4 channel
its much better than the local mumbo jumbo available but its expensive usually guys can setup a whole system in the price of that amp
haha
little bit from my side
Bassheads! For serious performance, check out the Sony Xplod XM-3001SXD mono amp — an efficient, Class D monster that's stable down to 1 ohm. For instance, hook up three 4-ohm subs (a 1.3-ohm load) and the XM-3001SXD will crank out an awesome 810 watts — that's 270 watts per sub!
A variable (50-200 Hz) crossover lets you tune bass output for your car's acoustic environment. Add in MOSFET power supplies, MOSFET output stages, gold-plated, recessed connectors, and built-in bass boost (0-10 dB at 40 Hz), and you'll agree — the XM-3001SXD is the ruler of the low-frequency kingdom.
Important Note: A 4-gauge amp wiring kit alone is not sufficient for installing this amplifier. Please call a Sales Advisor at 1-888-955-6000 for wiring recommendations.
Details:
- Class D circuitry
- 300 watts x 1 at 4 ohms
- 600 watts x 1 at 2 ohms
- 1-ohm stable
- 50-200 Hz low-pass filter, 12 dB/octave
- 0-10 dB bass boost centered at 40 Hz
- MOSFET power supply and output stage
- speaker-level inputs
- gold-plated connectors
- 4-way protection circuitry
- 14-1/8"W x 2"H x 10-1/2"D
boshman american not chaines
A versatile car amplifier designed to form the core of a great sounding car audio system. It provides 4 x 85W RMS (into 4 ohms) channels and utilises a MOSFET power stage with overload protection. It is perfect for powering a pair of splits and a subwoofer simultaneously (2 channels bridged, 2 channels in stereo mode). Low pass crossover can be set at 80Hz - 1.2KHz. The high pass crossover can be set from 40Hz - 150Hz.
The 4x150WRMS BOSCHMANN Car Amplifier is designed by highly qualified mobile acoustic professionals using the finest and most durable high-end components in the industry.
Features
- Four Class "AB" High-current dual discrete Drive Stages
- Class "AB" Technology MOSFET PWM Power Supply
- Bridgeable & Tri-mode operation
- Variable Low Pass filter 50Hz ~ 250Hz
- Variable High Pass Filter 80Hz ~ 1.2kHz
- Super Bass 0dB, 6dB, 12dB at 50Hz
- Treble Boost 0dB, 6dB, 12dB at 10kHz(4CH)
- Chrome Plated RCA input, Power, & Speaker Terminal
- 3 Piece Chromed Stainless Steel Aluminium Cast Heatsink
- Soft Start & Muting
- Overload, Thermal, Short Circuit Protection
- Power & Protection Indicator
Specifications
- 4 Ohms Continuous Power Output (14.4V): 85W x 4
- 2 Ohms Continuous Power Output (14.4V): 150W x 4
- 4 Ohms Bridged Continuous Output (14.4V): 200W x 2
- 4 Ohms Max Bridged Output (14.4V): 600W x 2
- Low Pass Filter: 50Hz -250Hz (variable)
- High Pass Filter: 80Hz -1.2kHz (Variable)
- Frequency Response: +1/-1 dB @ 5Hz-50KHz
- Bass Boost: 0/+6/+12dB (Ch 1/2)
- Treble Boost: 0/+6/+12dB (Ch 3/4)
- Stereo Separation: >90dB
- Damping Factore: 200
- Signal to Noise Ratio: >100dB
- Input Sensitivity: 200mV ~ 6V
- Input Impedance: 22K ohms
- Fuse Rating: 25A x 2
- Dimensions: 270x53x320
@Mohsin 129
there you go mate i dont need to pick someones ride to post pics when i say it that means i have it enjoy the orignal pics with my trainer on it
5https://www.pakwheels.com/forums/car-entertainment-electronics-gps-navigation/128634-humble-addition-quality-my-car-alpine-mrv-f540-bose-am55
oh come on mate 
didnt you get i was kidding ? ur an old player here and i know what you have in your ride...i even commented in your threads...
i just wanted you to try and grab some GUTS pics from ROE... thats it.... otherwise hells yeah i know what you running...impressive to say the least..
@mohsin
lol i know mate you are kidding i am just taking good interest in your thread its a nice thread though
cheers
16 days later
this is what im running
caliber monoblock ( a little less than 1000rms )
crunch 2 channel 500w (150rms)
premier 4 channel amp ( bought it as a temporary solution ,till i got my monoblock)
having some trouble uploadin the pix at the moment
Peoples make this thread of only
Posting AMPLIFIER PICS + Concentrated discussion Over it
Just Bring it on whatever you have from Lowend to Highend
Solid Audio F47 (the pics aint uploading so copying from ampguts)
Solid Audio F41 and Solid Audio F15d
Solid Audio F-47
4 x 100W @ 4 ohms (14.4V)
4 x 160W @ 2 ohms (14.4V)
2 x 260W @ 4 ohms bridged (14.4V)
Fuse: 2 x 40A
Solid Audio F-15D
1 x 800W @ 4 ohms
1 x 1150W @ 2 ohms
1 x 1500W @ 1 ohms
Fuse: 4 x 35A
here iz my amp
PP-AM15001
Powerplant Monoblock Amplifier
Superior Thermal Conductivity
PowerPlant amplifiers feature superior thermal conductivity ensuring heat dissipates efficiently
Rugged Amplifier Case
Single piece extrusion with seamlessly matched die-cast end caps which protects connectors and internal components
Over-sized Mounting Feet
The oversized mounting feet with their recessed holes provide secure and discreet fastening points.
Over-Sized Power Connection
Enlarged contact surfaces for high current connectivity
Stage 2 System Management Panel
Multi-function management panel enables you to refine the characteristics of the signal to suit your audio preferences.
Multiple Fuse Protection
Multiple fuses protect internal components and are easily accessible for quick changes in a competitive environment
Product Specifications
550 Watts RMS x 1 Channel @ 4 Ohms and 1% THD+N
850 Watts RMS x 1 Channel @ 2 Ohms and 1% THD+N
Max Power Rating: 1500 Watts
Max Current: 100A
Full Rated Power Distortion (Max) 1kHz: 0.15%
THD @ Rated Power 1kHz/100Hz: 0.1%
Frequency Response Hz (-3dB): 10Hz - 250Hz
Signal to Noise: >90
Variable Low Pass Filter: 12 dB/Octave
Bass Boost @ 45Hz: 12dB
Input Sensitivity: 0.2 - 8V
Input Impedance: 47K
Fuse Rating: 25A x 4