Please help me find idle air control valve for my Honda Civic 2000 vti manual

[pwuser150168997648]

Dear members plz need help advise me from where I can get idle air control valve for my Civic 2000 used or kabli . Pics are attached plz need information.

[alibintahir]

It'll be great if you also mention your City, this way you'll get quick help I'm sure.

[pwuser158913575038]

What happened to the current one? Stuck or what?

[pwuser150168997648]

It's not closing properly mean little bit air leaks on the other side normally it should completely close and properly sit on its seat but today when my mechanic was cleaning it and he observed it was leaking air on the other side while he was spraying with carb spray. I have slightly idle issues ...

My idle stays at 900-1000 without ac, when ac on it drops until 500 and slight come back to 1000 again, I think it should happen very fastly but it takes little longer, this causes engine to vibrate and sudden drop in speed while driving when ac cut in cut off.

[pwuser150168997648]

Brother I am from mirpurkhas, Sindh and 60 km away from Hyderabad & around 260km from Karachi. But I think I would have to ship this to my city.

[alibintahir]

Oh, then that must be a challenge for you. Best of luck in finding the one brother.

Sorry, I can't help you there as I'm from Isb./Rwp.

[pwuser150168997648]

Noted brother thanks anyway

[alibintahir]

I wish I could be of any help to you.

[pwuser150168997648]

Why no body help on pakwheel these days . Really disappointed ️

[syedfaizan1]

Bro you can ask anyone from karachi to send you to Mirpur Khas. let me give you a number of guy if you want! he deals in old parts

[syedfaizan1]

You can get it from Plaza karachi or SherSha Market or Shafiq More market. if you have any friend here, you can ask him to buy it for you or i can give you some shops number , you can contact them to buy it

[syedfaizan1]

Contact him Name : Saud 0313 2736518 , he Deals in all Car parts here in karachi. he is on whatsapp too. you can inquire from him. hope your issue will be resolved.

[nfssaad]

if you can find the exact part number

check daraz. china option. chinese metal normally doesnt go bad, you can swap the solenoid with the existing one you have.

[nfssaad]

if your part number is 36450-P2J-J01

[pwuser150168997648]

Thanks a lot brother I will contact him

[pwuser150168997648]

Brother how would i swap the solenoid ? By removing the pin ? May be if I can remove the pin of current one, I might fix it? as the butterfly valve seem to be not properly sitting on its seat. May be due to dust although mechanic serviced throttle body, but he didn't remove the solenoid of valve.

I don't the exact part no I will check it for sure in case I can't find kabli one I will go for Chinese option. Thanks