P2109 Toyota Vitz

shahzilahmed6 (Shahzil ) 2021-10-22 17:13:52 +0500 #1

Asalamoalaikum, I was facing vibration on idle and very low fuel average with ac 9kml in my vitz 2015 model
Today i got it scanned and it showed this trouble code P2109 Throttle pedal position sensor A minimum stop Performance. It comes back after 2 days after clearing the code and electrician was saying you have to replace TP sensor because this is causing vibration and low fuel mileage. Please any experts guide how to fix this issue?

P.s I have already replaced spark plugs cat cleaned injectors cleaned every tuning thing done.

shahzilahmed6 (Shahzil ) 2021-10-22 17:14:49 +0500 #2

malik593-1 (malik593-1) 2021-10-22 17:31:15 +0500 #3

before replacing try removing tp sensor and putting it back ,that did solve my problem in honda city (its been 2000km ever since)

capsat (ومن شر حاسد إذا حسد) 2021-10-22 19:37:50 +0500 #4

how old is your car? as in your possession.

It appears that the JDM vehicle you have is loaded with electrical wiring issues.
The screen captures from scanner are exposing the stored & current codes. @babarhyd
you need pro grade electrician who can use DMM for fault diagnosis with patience.

shahzilahmed6 (Shahzil ) 2021-10-22 19:49:54 +0500 #5

Its been 1year since i bought it

capsat (ومن شر حاسد إذا حسد) 2021-10-22 19:51:21 +0500 #6

if you are in lahore you need to dial 0321 4106898 Obama Car centre

shahzilahmed6 (Shahzil ) 2021-10-22 20:15:19 +0500 #7

I'm in karachi any expert here?

capsat (ومن شر حاسد إذا حسد) 2021-10-23 19:26:50 +0500 #8

Call up Abid Hameed 0333 2201002 10 am to 7 pm weekdays. Location is preedy police station -malik autos By Appointment only.

hibtisam (hibtisam) 2022-09-06 17:10:50 +0500 #9

Bro i searched for this center on maps, its not showing. Can u reconfirm name or guide me about location?

capsat (ومن شر حاسد إذا حسد) 2022-09-06 19:51:45 +0500 #10

and what was your question ?

pwuser161228146379 (Mahd Naqi Bangash) 2022-11-13 19:02:35 +0500 #11

Asalamu alaikum I hope you are fine.
I am also getting this error whenever I connect scanner to my car. Fuel average is good acceleration is also good. Using recommended oil. STFT LTFT values are normal, vehicle and calculate load at idle without ac is below 25. Everything is fine still getting this error.

capsat (ومن شر حاسد إذا حسد) 2022-11-13 19:26:31 +0500 #12

It is CODE for Throttle Position Sensor inside the cabin under dashboard at drivers' accelerator pedal. Need to be checked and replaced. First try to clean with Electronic Circuit cleaner spray after disconnecting from its grip.

rajaatta (Raja Atta) 2022-11-13 20:40:46 +0500 #13

No it happens when we drive it in urban mode and in stop and go traffic with irregular acc pressure

pwuser161228146379 (Mahd Naqi Bangash) 2022-11-14 21:00:34 +0500 #14

This issue is almost in every Vitz. My friend has tried that but still he is getting error.

pwuser161228146379 (Mahd Naqi Bangash) 2022-11-14 21:03:52 +0500 #15

But why this happens in Vitz only? And any disadvantage of this error?