Is the g13b dohc swift gti engine is bolt on suzuki khyber 1995?

[sb_rizuu1]

im thinking to swap g13b dohc 16 valve engine in ma khyber guyzzz is it bolt on or any alteration is requireddd plzzz xpert opinions??????/ n i also want 2 koe abt performance ov dat engine plzzz is it really gonna work in ma khyber i mean increases it performance as its 101bhp????????

[last_look]

g13b is 100bhp and yes it will increase your bhp lmao and yes its a bolt on fit

[sb_rizuu1]

but i hear dat AC wont fit in wd g13b setup in khyber due to less space ???????? is it true ??/ n wot da 0-100 time if i installed dat setup???

[sb_rizuu1]

any wild guess abt price??? ma range is 45k to 55k can be 60k too if da setup really appealing wot u think can i get dat setup in dis range??? or i ve to spend more???

[Xulfiqar]

everything fits with the G13B in Khyber - the jap suzuki swift aka SA310 aka khyber are the same cars - the usualy punga with this engine in khyber is that pak suzuki did not finish the front bottom radiator support correctly - it needs a little heating/hammering for it to clear the exhaust manifold, the A/C compressor fits nicely but both the suction and discharge pipes are routed to the right with angled fittings.- rather than the euction coming from the left. - Use the original G13B compressor and use its original wiring setup - it cuts out the A/C at full throttle.

[sb_rizuu1]

thx zulfiqar its informative b/w wot u think abt ma price range???? n u mean 2 say not a single major alteration rite??? dis setup is v rare in markets findin.... hear its available in shooba bazar peshawar soon visit dere inshALLAH till dan running g10

[Xulfiqar]

you would find a half n half engine in that price range - and the most fiddly part with this engine is that if the head is rebuilt incorrectly it will burn out valves or the valves may float at higher revs - the lifters (tappets) in this engine are hydraulic (thats why it says to use mobil-1 full synthetic 5W40 only)

But believe me Ive driven many engines - this one is a gem - nothing feels like it.

[sb_rizuu1]

dan kitnay tak aik ala condition ma mil jaye ga?????

[Eddy5]

Dont know if you bought one already or not. but its an old engine and was used many years ago. no parts available. problematic and eventually very costly.

also note that the local khyber will run like a heavy elephant with this engine!. you will need to modify braking as well as suspension.....to get a good feel. you will get power , naturally as it is more powerful ( but a 100 bhp is small change) but the over-all dirve, steering etc of the car will not be smooth. again. no parts any more.

[waseem0786]

does m13 Doch suzuki swift engine bolts on khyber cux i have 1 in very mint condition with every thing ecu, abs suspention rediator steering assembely gadry (lower assembly front and back) all foundations fuel pump and fuel tank althoug i have swift complete steering and dashbord but i dont want it to fit in khyber but i have swift orignal seats and they are way comfortable and want them in my khyber can i swap these thing in to my old swift i have complete saman of suzuki swift pak suzuki motor wali 2013 model and i have khyber 93 can i put these thing it my khyber plzz help my no is 0312-5153-543 i will be thank full to you i need help regards

[waseem0786]

​please help needed
does m13 Doch suzuki swift engine bolts on khyber cux i have 1 in very mint condition with every thing ecu, abs suspention rediator steering assembely gadry (lower assembly front and back) all foundations fuel pump and fuel tank althoug i have swift complete steering and dashbord but i dont want it to fit in khyber but i have swift orignal seats and they are way comfortable and want them in my khyber can i swap these thing in to my old swift i have complete saman of suzuki swift pak suzuki motor wali 2013 model and i have khyber 93 can i put these thing it my khyber plzz help my no is 0312-5153-543 i will be thank full to you i need help regards

[manwancloud]

Bhai, please assist me https://www.pakwheels.com/forums/t/g13b-tappets-and-starting-issue/3012066

[Hassan1991]