Will be visiting the workshop tomorrow to check the progress. Will update you all then!
The side skirts were fitted yesterday. More pictures will be uploaded tomorrow
Will be fitted on the car tomorrow Insha'Allah.
Visited the workshop at 5 in the morning to check what's the progress, the putene has been applied to the parts and rest will be done today, but I'll visit the workshop on Wednesday and update with the rest then.
Came to fsd for a week so before that, took some pictures for you guys. The bodywork is going to take another week because the lights from MACTEC were really expensive so I've bought them from Dubai now.
The new diffuser will be fixed once the exhaust is changed back to my Auto Exe catback system.
Roll the fenders arches
Don't worry. I'm taking care of everything, the bodywork is still unfinished
but they put the filler on it. if you roll without heating it, it will break means the filler with pops out
You are spending a fortune, why didnt you ask the denter to peal off the entire paint and than repaint it. Most denters would say is sa faraq nahi perta sirf jahan paint kharab hota ha wahan filling kerta hain but IMO i have seen both works done and it does matter if car is pealed off completely till you can see the charder and than repainted.By the way will they paint in the open or do they have a heat chamber ?
this is what happen if they didn't bare the metal before paint. small bubbles or pores will start appearing on paint after some years whether baked or not. because of paint underneath it.
Saw your RX8 a couple of days ago, at Mactec. Had to go there with a friend of mine (an auto electrician btw) who had to fix another RX8 (grey) swapped with 4GR-FSE coupled with Mazda's stock tranny. It's idle was eratic...was some ECU wideband issue.
Finished in matte black
